MVS ATLAS

Results measured in the field.

Twelve outcomes from MVS group projects in the Middle East, North Africa and Latin America. Client names are withheld under confidentiality.

0 min5 min15 min30 min60 min
A bottle test: the emulsion resolves into clean oil over clear water as time passes.

Emulsion viscosity reducer

Offshore Qatar

Challenge

Viscous emulsions limiting production across a group of offshore wells.

Result

17,000 BOPD. 5 to 25% more oil in 9 of 17 wells, with less than half the chemical of the incumbent.

Schmoo dissolver

Saudi Arabia

Challenge

Schmoo plugging filters in a 515,000 BWPD water-injection system.

Result

Fewer filter change-outs and about USD 5,000 saved per event.

Non-triazine H2S scavenger

Oman and Egypt

Challenge

H2S above 4,000 ppm in 37 to 45 °API crudes with 50% water cut.

Result

H2S reduced to 25 ppm. 5 to 28% production increase, even with seasonal swings.

Emulsion viscosity reducer

Kuwait and Qatar

Challenge

Production losses from high water cut and hydrostatic pressure in 19 to 28 °API crudes.

Result

4 to 39% production increase.

Demulsifier

Iraq

Challenge

High salinity, high water cut and low retention time at the central processing facility.

Result

Crude kept within commercial specification: below 0.2% water and 5 PTB salt, with better chemical efficiency.

Crude treatment offshore

Saudi Arabia and Egypt

Challenge

Offshore production under low temperature and high salt content.

Result

More reliable production and crude quality kept within specification.

Asphaltene control

Algeria, Colombia and Venezuela

Challenge

Severe asphaltene precipitation and stable emulsions in 14 to 29 °API crudes.

Result

Better crude flow and stable production for national and independent operators.

Paraffin control

Egypt and Colombia

Challenge

Unstable paraffin in gas-lift wells causing tight emulsions.

Result

10 to 29% production increase, lower pipeline pressure and better phase separation.

Iron sulfide dissolver and biocide

Colombia

Challenge

Iron sulfide deposits and bacteria reducing injectivity.

Result

Injectivity restored at a 35 ppm maintenance dose, with H2S down 30%.

Demulsifier for polymer flood

Argentina

Challenge

Polymer returning with the crude and interfering with separation.

Result

100 to 250 ppm, against 300 to 500 ppm typical under polymer interference.

Demulsifier

Oman

Challenge

Qualification for an onshore operator.

Result

Approved and in commercial supply in 2026.

Pipeline cleaner

Gulf region

Challenge

Qualification against the incumbent product of a major national oil company.

Result

Approved by the national oil company and blended in the region.

Have a similar problem? Send us the data.

Talk to our team